My First Day in MBII

Hexodious

Moderator
Movie Battles II Team
Posts
722
Likes
722
NbQqKVF.png

This is an introduction for new players, hopefully it will help you understand the basics upon entering your first game.

Before you read it all, go and watch video of Movie Battles II Introduction made by Vongs Yuzzan on Youtube -

Initial Setup
Once you have the game up and running the first thing you will want to do is make sure that your controls are set and the graphics settings have been tweaked. The first thing I like to do is unbind all the current controls by opening the in-game console using Shift+` (tilde button left of 1) and typing /unbindall. After you've unbound the defaults go to the controls section:

9FhzH74.png
Important Keybinds in Moviebattles II
Escape > Controls
> Movement > Walk/Crouch - Used to counter knockdown mechanics and increase aim on certain weapons
> Interaction > Use - Used to activate switches and objectives, as well as perform some special moves
> Interaction > Toggle Weapon Mode - Used to switch lightsaber styles and secondary firing modes of weapons and utilities
> Moviebattles > Special 1 - Used to execute class special move 1
> Moviebattles > Special 2 - Used to execute class special move 2
> Weapons > Reload - Used to reload your weapon
> Moviebattles > Class Configuration - Used to bring up the points menu allowing you to redistribute your class abilities

Important Graphical Settings
Escape > Setup
> Visual Options > Enhanced Effects - Set this to Normal, the High FX creates a lot of smoke which makes it hard to shoot enemies and can drastically effect FPS in firefights

Important Network Settings
Escape >Setup
> Networking > Rate - Set this to 25000
> Networking > Max Packets - Set this to 100
> Networking > Snaps - Set this to 40

Important Gunplay Settings
Shift+` (tilde button left of 1)
/seta cg_thirdpersoncameradamp 1
/seta cg_thirdpersontargetdamp 1
seta cg_bobpitch "0"
seta cg_bobup "0"
seta cg_bobroll "0"
seta cg_breathingEffects "0"

Gameplay
MB2 has a steep learning curve with lots of abilities and veteran players, I would recommend spectating some games and viewing the in-game Library to get a general feel of the gameplay... But that's not as fun as simply giving it a go! Now that we've got the basic setup complete you'll want to join a game, I would recommend sorting the list by players and joining one of the busier servers with a decent ping. However it is important to note that MB2 has multiple gamemodes:

Full Authentic (FA)
Full Authentic servers use the same maps as Open or Duel gameplay modes but provide preset classes with limited slots to help recapture the movie feel of particular maps. Full Authentic maps tend to have abilities not found in the other game types and can be very interesting to play.

Duel Mode
The saber system in MB2 can be quite in depth compared to other multiplayer games and takes some getting used to. The best place to ask for advise on the saber system are the Duel servers, with good representation on both EU and US servers and restricted to Jedi and Sith you'll have no problem learning in a gun-free environment.

Open Mode
Open Mode is considered the primary game-mode in MB2. You are able to select one of 7 classes for either the Rebels or the Imperials spanning across the entire current known trilogies and customize them for your liking. Open Mode gives the player 80 points that they can use as they wish to customize their character providing options for multiple builds, as you are just beginning I would recommend using one of the present builds available for now and then tweaking these to your own preferred playstyle.

v16jKmr.png
The Walk Key
The walk key is one of the most important keys in MB2 as it protects you from the knockdown effects of Force Push and Pull while increasing your accuracy on many guns and allowing you to regenerate secondary resources such as Block Points (BP - Jedi and Sith), Stamina (Clone and Advanced Recon Commando), Battery (Super Battle Droid). Always be ready to walk (or crouch!) during combat to ensure success.

Class Specific Gameplay
With so many options for the game you may find it overwhelming where to start. Check the below overviews for the classes where I also mark the difficulty for specifically for new players.

soldier-reb.png
soldier-imp.png
Soldier - Faction: Rebel / Imperial - Difficulty: Easy
Soldiers can have up to 3 lives and a limited set of abilities, the primary gun of the game (E-11) and no secondary resources to choose from which makes them pretty good for starting out, the only problem you are likely to face is the low health which means you'll spend a lot of time dying.

commander-reb.png
Elite Trooper - Faction: Rebel / Imperial - Difficulty: Easy
Elite troopers are a more powerful version of the Soldier and the class I personally recommend new players start out with. They still give you an additional life without any additional resources to worry about but provide more health and staying power. Once you've figured out the gameplay with the Elite Trooper you'll be ready to move onto the Single life classes, many of the base mechanics continue over to the more advanced classes.

clone.png
Clone - Faction: Rebel - Difficulty: Easy
The Clone rifle is a powerful weapon with huge clip that lets you shoot for extended periods of time, but can be punishing with a long reload time. Best used for control able to knockdown enemies with Concussive Blasts and disable enemies (specifically the Droid Classes SBD and Deka) with Ion Blasts. Clones come with the ability to either have a secondary life (recommend) or the extremely powerful Rank 3 Clone Rifle which has the highest firing rate of any weapon in the game and can be extremely fun when combo'd with the Stamina 3 ability to sprint and shoot at the same time (Activated by Special 1).

sbd.png
Super Battle Droid - Faction: Imperial - Difficulty: Medium
The SBD is a very powerful class when played right but have inherent weaknesses, the player loses the ability to jump or move while crouching while playing as the SBD and has to manage the Battery resource. The Battery effects everything the SBD can do, from firepower to damage reduction provided by its special armours. You need to make sure you walk to keep this as high as possible and not get trapped out in the open while playing the slow moving SBD. But for all of the above weakness the SBD is a very tanky class that can shoot almost as Fast as the clone and be built to counter different enemies, from Explosives, to Guns, to Jedi. An important button for the SBD is Low Power Mode (toggled using Special 1) while in Low Power Mode you cannot shoot but regenerate Battery very quickly.

arc.png
Advanced Recon Commando - Faction: Rebel - Difficulty: Hard
The ARC specialises in countering the Droid classes on the Imperial team and can be very efficient at helping a team push their assault through the use of its EMP Grenades but the class despite its high maximum health and armour is often considered squishy due to its low base movement speed, weaponry and double edged Dexterity ability. Dexterity allows the ARC to dive behind cover (using Special 2) at the cost of Stamina and can also Sprint (using Special 1) in the same way as the Clone, higher rank provide more movement options but these are very susceptible to knockdowns or forced rolls from enemy Sith.

mandalorian.png
Mandalorian - Faction: Imperial - Difficulty: Medium
The Manda is the Imperial version of the ARC and considered more powerful overall. With the ability to fly for limited periods of time (immune to the knockdown effects of Push/Pull during flight) and powerful weaponry the Mandalorian is a very fun class to play. The primary resource you will be using as the Mandalorian is Fuel, used for both flying and using the Flamethrower secondary weapon (Special 2), your other secondary weapons include the Wrist Laser (Special 2, using toggle weapon while in melee to switch from Flamethrower) and a single use Rocket (Special 1).

hero.png
Hero - Faction: Rebel - Difficulty: Hard
The Hero is a very fast class that is primarily used as the Sniper of the Rebel faction. They can use the Dash ability (Special 2) to avoid enemy attacks and switch cover rapidly however it suffers from the lowest health of the single life classes and can be easily be killed by the heavier classes if not played well.

bountyhunter.png
Bounty Hunter - Faction: Imperial - Difficulty: Medium
The BH specialises in long range combat and killing Jedi. Combined with two sniper rifle options (the projectile rifle for heavy movement and the disruptor for deadly precision) and heavy movement speed the BH is an extremely dangerous foe for all of the Rebel classes. The Bounty hunter has access to Poison Darts (Melee + Special 2) that can be used on Jedi to disable the ability to regenerate force points.

wook.png
Wookiee - Faction: Rebel - Difficulty: Easy
The Wookiee is one of the strongest rebel classes due to his sheer Strength and Bowcaster weapon. While using Strength 2 or higher the Wook is immune to the effects of knockdowns and can run freely where other classes would have to walk. When combined with the Bowcaster this means the Wookiee can easily kill enemy while moving around the battlefield with freedom. The Wookiee can also be configured to be a very powerful melee opponent, using melee to quickly down down enemies with the Slap ability (Alt Attack).

droideka.png
Droideka - Faction: Imperial - Difficulty: Hard
The Deka is a very powerful class and can completely change a round but plays so differently from other classes within MB2. The class is not recommend for new players due to its clunky controls despite its power in the hands of more experienced players. Using a regenerating shield and heavy firepower the Deka can be used in two modes toggled using the Crouch key: Roll - the Deka has increased movement speed but takes double damage from all attacks or Deployed - the Deka is ready to fight with his shields deployed and weapons activated, while deployed the shields can be toggled between on or off using Special 1. Deka's can change their secondary ability between rounds from Quick Deploy, Shield Discharge or Power Management but can't use all 3 at once.

sith.png
Jedi and Sith - Faction: Rebel / Imperial - Difficulty: Hard
Jedi and Sith are vastly different from the base game and can be easily killed by more experienced players. The primary role of the Jedi is to provide support by knocking down running or jumping enemies but can be very powerful fighters when played well. Jedi use a combination of the Force and a Lightsaber to fight there enemies. While holding Alt Fire with the Lightsaber equipped the Jedi enters a Blocking state, taking reduced Force (FP) drains from guns and reduced Block (BP) drains from lightsabers.

With all classes I would recommend spectating players and seeing how they are playing each class, playstyles vary from player to player but the best way to learn is simply giving it a go. If you have any questions I am often in-game on the Euro side of MB2, see my tag in the signature below.
 
Last edited:
Posts
506
Likes
545
I also use some commands that I don't understand, posting in case they're useful
seta cg_bobpitch "0"
seta cg_bobup "0"
seta cg_bobroll "0"
seta cg_breathingEffects "0"
seta com_affinity "3"
seta r_subdivisions 80
seta r_vertexlight 1
seta r_picmip 4
 
Posts
239
Likes
540
cl_bobx are for first person, so your crosshair doens't go up/down when running

breathing effects is the vapour that appears on echobase for instance

affinity is for cpu cores

others are graphics, not 100% sure :)
 

Preston

Nerd
Posts
1,022
Likes
653
I also use some commands that I don't understand, posting in case they're useful
seta cg_bobpitch "0"
seta cg_bobup "0"
seta cg_bobroll "0"
seta cg_breathingEffects "0"
seta com_affinity "3"
seta r_subdivisions 80
seta r_vertexlight 1
seta r_picmip 4
What do all theae commands do? And how do you reset them back to default?
 

GoodOl'Ben

Nerd
Donator
Movie Battles II Team Retired
Posts
1,116
Likes
1,657
I'm planning on creating a separate web page based on this.

If people think they've got some good tutorial content to add, I recommend writing some stuff down here and I'll keep it in mind 8)
 
Posts
1,013
Likes
572
I'm planning on creating a separate web page based on this.

If people think they've got some good tutorial content to add, I recommend writing some stuff down here and I'll keep it in mind 8)

Could you explain what the network settings are and do?

> Networking > Rate - Set this to 25000
> Networking > Max Packets - Set this to 100
> Networking > Snaps - Set this to 40

I have a friend that is curious, and I have a feeling new players will not understand this section.
Because I certainly don't.
 

Cat Lady

Movie Battles II Team Retired
Posts
412
Likes
237
rate (server equivalent: sv_maxrate) is max amount of data (in bytes, per second) exchanged betweens server and player. It can be limited on both server and player side, and obciously, the lower value is in effect (so if server limits rate to, let's say 5000, then it will communicate with players at up to 5000, unless some player set lower value, for example, 4000 - server will communicate with this player with 4000 rate, and 5000 with others).

No server that I know of sets it to more than 25000 (which is overkill anyway, but in days of current high transfer speeds, it doesn't matter for players and most servers, unless capped very low at upload speed), so it is safe to set it that high to always get max out of your connection.

Side note: too low rate (or other data transfer issues) can be visible on lagometer as ping sections getting yellow instead of blue (even despite low ping).
---

snaps (server equivalent: sv_fps) is "framerate" of server-client communication (aka, how often server and client are sending info about their state changes). It is capped at 40, and most servers use this value, which mean you get updates about state of the in-game world (bullets flying, players moving) 40 times per second, and you set updates about what your character is doing at the same rate. Speaking of "Rate" - just like in the previous setting, the lowest value (between client-server pair) is in use.

Side note: lack of synchronization between server state updates and clientside movement prediction (aka where your game think you should be, and where you turn out to be after server send new update) is represented as yellow triangles (small ones may resemble dots) in lagometer's blue line. Small yellow dots can happen from time to time and aren't a problem, albeit big fat yellow triangles are sign of issue and you may experience "teleporting").
---
I don't remember what maxpackets do, but I'mpretty sure you actually don't need to set it to 100 (anyway, it is easily googleable, like all q3engine commands).

/Cat Lady
 
Posts
1,013
Likes
572
Now games that have multiplayer these days don't have these kind of settings I am aware of. I just start the game, pick server or match making and it just works. Is this because JKA runs on an older engine? And when the engine was made, they didn't think to or have the resources to have it adjust itself?
 

Cat Lady

Movie Battles II Team Retired
Posts
412
Likes
237
No, it is because many modern day games treat users as imbeciles that shouldn't touch any serious setting at all, thus changing anything is hidden or not available at all.

There isn't such a thing as "Self adjusting" for every case. Using such options manually (and many others) you can make gameplay work in best possible way no matter if you play on 56k modem, cellular, or super-duper broadband fiber (obviously, the latter will still be better than the former, but the former will be better after tweaking than it would be without).

Nowadays, they just consider everyone sits on super-duper fiber, so they default settings to that case and lock them out of user view.

/Cat Lady
 
Last edited:

Kitho

Donator
Posts
21
Likes
16
Hello Hexodious,
I really like your guide!
Can you maybe add all those Information in a Word-File or create a PDF-File and attach it to the MB2-Build,
maybe someone can create a Config.File that includes all those nice Commands with a little describtion and u include that Config in the standard MB2-Build as well?
You seem to be a very nice person Hexodious!
=))
 
Posts
460
Likes
683
Before you read it all, go and watch video of Movie Battles II Introduction made by Vongs Yuzzan on Youtube -
We need something like this on the front page of the forums. Maybe with a video that actually shows the things he's explaining and not just random gameplay.
 
Posts
296
Likes
216
This is great info for new players. Both the video and info provided. Now if we could just stop our community from saying "type /qui gon in console to dance"
 
Top