•     Please make sure you check the Support FAQ and relevant Guides before you create a new thread in this section!

Hosting Server Limit Time

Posts
6
Likes
0
On my server, when we plays RP, sometimes the timelimit stops at 1min of the end. Then, we must retake our classes and teams..
It's very frustrating.
What's wrong ?
Code:
// Movie Battles II
// Sample Server Config

// Server Config:
seta sv_hostname "^1Roleplay ^2Server"                        // Name of your server
seta g_motd "Welcome, play RP and have fun !"        // Message of the Day

// Additional master servers to report to
seta sv_master1 "master.moviebattles.org"            // Master servers - do not alter unless you know what you are doing.
seta sv_master2 "master.jkhub.org"
seta sv_master3 "masterjk3.ravensoft.com"
seta sv_master4 "master.qtracker.com"
seta sv_master5 "master2.moviebattles.org"

// Administration:
seta rconpassword ""                        // Rcon admin password - CHANGE THIS

// See MBII_Readme (GameData folder) for info on bitvalues!
// If g_smodconfig_1 is set to 0, smod system is disabled.
// Accounts without password are disabled aswell.
seta g_smodAdminPassword_1 ""               // Smod admin password - CHANGE THIS
seta g_smodConfig_1 "65535"                 // All commands enabled
seta g_smodAdminPassword_2 ""
seta g_smodConfig_2 "7"                     // Kick, nextmap, map.
seta g_smodAdminPassword_3 ""
seta g_smodConfig_3 "0"
seta g_smodAdminPassword_4 ""
seta g_smodConfig_4 "0"
seta g_smodAdminPassword_5 ""
seta g_smodConfig_5 "0"
seta g_smodAdminPassword_6 ""
seta g_smodConfig_6 "0"
seta g_smodAdminPassword_7 ""
seta g_smodConfig_7 "0"
seta g_smodAdminPassword_8 ""
seta g_smodConfig_8 "0"
seta g_smodAdminPassword_9 ""
seta g_smodConfig_9 "0"
seta g_smodAdminPassword_10 ""
seta g_smodConfig_10 "0"
seta g_smodAdminPassword_11 ""
seta g_smodConfig_11 "0"
seta g_smodAdminPassword_12 ""
seta g_smodConfig_12 "0"
seta g_smodAdminPassword_13 ""
seta g_smodConfig_13 "0"
seta g_smodAdminPassword_14 ""
seta g_smodConfig_14 "0"
seta g_smodAdminPassword_15 ""
seta g_smodConfig_15 "0"
seta g_smodAdminPassword_16 ""
seta g_smodConfig_16 "0"

// Shuffle and Auto-balance Settings
set g_ShuffleTimer "5"                    // How long in seconds clients must wait before they can change teams again after shuffle is used.
set g_autoteambalance "0"                    // Auto-balance setting - 0 = OFF, 1 = ON.  Off by default.
set g_allowunbalance "2"                    // How many players a team may be stacked before auto balance intervenes. Ex: If teams are 6 on 5 and g_allowunbalance is 1 players cannot join the team with more players.

// Logging
seta g_log "games.log"                        // Filename to record logging information to. ex: "serverlog.txt" If left blank, do not log.
seta g_logClientInfo "0"                    // Logs client information changes if set to 1 (More detailed logging, useful in matching clients to IPs.)
seta g_logSync "0"                        // Use synchronous appending in log writes. (May impact server performance if set to 1(Not generally recommended), but may provide more detailed logs if a crash occurs.)

// Server Settings:
seta sv_fps "40"                        // Server FPS setting.
seta sv_maxclients "24"                        // Number of your server's player slots
seta sv_privateClients ""                    // Number of private slots
seta sv_privatePassword ""                    // Password for using the private slots
seta sv_pure "0"                        // Pure setting - 0 = off, 1 = on. If enabled, clients can only use pk3s which match the ones on the server.
seta sv_maxRate "25000"                        // Server-side cap for /rate. Settings higher than 25000 do not improve the client's ping.
seta sv_maxPing "0"                        // Only players with a ping below this can connect to your server. "0" = disabled.
seta sv_timeout "600"                        // Timeout - do not alter unless you know what you are doing.
seta sv_minSnaps "20"                        // Sets minimum snaps client can have.
seta sv_minRate "2000"                        // Sets minimum rate client can have.
seta sv_maxConnections "3"                    // Maximum number of connections from one IP (prevents many crash scripts).
seta sv_floodProtect "1"                    // Prevent flooding of chat and admin commands.

// Movie Battles II Settings:
seta g_gametype "7"                        // Gametype - 3 = Duel, 4 = Power Duel, 7 = MovieBattles Mode.
seta fraglimit "100"                        // If a team reaches this amount of won rounds, it wins the map.
seta roundlimit "50"                        // When the total rounds reaches this amount, the map ends. Ties may happen.
seta timelimit "10"                        // Timelimit. No point using this, seeing as rounds end after 5 minutes.
seta g_MinMBPoints "80"                        // Semi-Authentic: Amount of MB points players start out with.
seta g_MBPointsPerRound "3"                    // Semi-Authentic: Amount of MB points players gain every round.
seta g_Authenticity "2"                        // MB Mode setting - 0 = Open mode, 1 = Semi-Authentic, 2 = Full-Authentic.
seta g_allowedHeroClasses "0"                    // Limit classes on Hero team in Open mode. See Readme for details.
seta g_allowedVillainClasses "0"                // Limit classes on Villain team in Open mode. See Readme for details.
seta g_TimePeriod "0"                        // Set time period in Open mode. See Readme for details.
seta g_EUAllowed "1"                        // Allow / disallow Expanded Universe models in Open Mode. 0 = disallowed, 1 = allowed.

// Anti-Cheat System:
seta g_AntiCheat "1"                        // Cheating or unverified clients will be automatically kicked. 0 = disabled, 1 = enabled.

// Anti-Teamkill System:
seta g_TKPointsMinorFriendly "1"                // Ignore damage amounts below 5 for purposes of applying g_TKPointsSpecCount (Stray very minor splash damage is permissible.)
seta g_TKPointsSpecCount "400"                    // Player will be forced to spectate if he/she has accrued this many TKPoints for team kills or hurting teammates. 0 = disabled.
seta g_TKPointsKickCount "700"                    // Player will be kicked and temp-banned from the server if a player has gotten this many TKPoints for team kills or hurting teammates. 0 = disabled.
seta g_TKPointsForgiveAfterRounds "2"                // How many rounds must pass without any TKing by the player before g_TKPointsRemovedPerRound applies. 0 = always.
seta g_TKPointsRemovedPerRound "50"                // Each round that passes without the player having done any TKing, this many TKPoints will be removed from their total. 0 = disabled.
seta g_TKPointsTempBanForRounds "10"                // Number of rounds player gets banned for after exceeding g_TKPointsKickCount count.

// Misc:
seta g_FullSpecTalkToPlayers "1"                // Allow / disallow spectators talk to 'living' players (ghosting).
seta g_chatProtectTime "250"                    // Ammount of time that has to pass between two chat messages sent by player for them to be valid.
seta g_password ""                        // Password players need in order to be able to join your server.
seta g_allowVote "127"                        // Allow votes - 0 = all votes disabled, 127 = all votes allowed. See readme for details.
seta g_automapcycle "0"                        // Use automapcycle instead of a custom one. 0 = disabled, 1 = enabled.
seta g_dismember "100"                        // Dismemberment probability. This is a percentage, i.e. 100 is the maximun setting. Clients have to adjust the cg_dismember cvar accordingly in order to see dismemberment.
seta g_allowNPC "1"                        // Do not alter.
seta g_noSpecMove "0"                        // Allow / disallow spectator movement. 0 = spectators can move, 1 = they cannot move.
seta g_spectateTeamOnly "0"                    // 0 = Spectators can spectate players from either team, 1 = Spectators can only spectate players from their own team.
seta g_AllowEntity_target_level_change "0"            // Whether or not to permit the target_level_change map entity to function. (Maps which utilize this feature can break map rotations.) 1 = enabled. 0 = disabled.
seta g_HideHUDFromSpecs "1"                    // 0 = Spectators can view the HUD from 'living' players, 1 = disabled.
seta g_InactivityKick "0"                    // Time in seconds until an inactive (i.e. not moving etc) client is kicked.
seta g_InactivitySpec "360"                    // Time in seconds until an inactive (i.e. not moving etc) client is moved to the spectator mode.
seta g_filterban "1"                        // If "0" - only players who are on the banlist may join. 1: people on the banlist may not join.

// Map rotation:
set d1 "map mb2_commtower;set nextmap vstr d2"
set d2 "map mb2_tradefed;set nextmap vstr d3"
set d3 "map mb2_lunarbase;set nextmap vstr d4"
set d4 "map mb2_republiccruiser;set nextmap vstr d5"
set d5 "map mb2_jabba;set nextmap vstr d6"
set d6 "map mb2_jeditemple;set nextmap vstr d7"
set d7 "map mb2_tatooine;set nextmap vstr d8"
set d8 "map mb2_kamino;set nextmap vstr d1"

vstr d1                                // Start the first map in the rotation
Another thing, my "/rconPassword ..." Dont work. When i do it, it said nothing :/
Last thing : Is there anyway for remove the time limit ? 5 min is so quick for rping.
Thanks for the help ANYWAY !
 

MaceMadunusus

Level Designer
Donator
Movie Battles II Team
Posts
1,913
Likes
2,672
Nothing in that server config should be limiting the time to 4 minutes or so. Check the .siege file for the respective map you are playing. You can find them in MBAssets3.pk3/maps/mapname.siege

Look for a line that says Timed.... it should say Timed 300. If it has another value, change it to 300 and that should fix the round ending early.

The mod itself however was designed to be played in Assault mode where people fight one another and as such a design choice was made to limit the round time to 3-5 minutes to preserve gameplay intentions so you cannot currently remove the timelimit.
 

Puppytine

Slayed dreamer
Posts
2,237
Likes
1,493
Last thing : Is there anyway for remove the time limit ? 5 min is so quick for rping.
lol, no, 'cause MaceMadunusus gets really, REALLY triggered when somebody mentions "RPing" and "remove time limit" :D.
A lot of related drama:
Full Open game mode
RP servers
Hosting Server - Time limit removal
[SOLVED] - Time
Another thing, my "/rconPassword ..." Dont work. When i do it, it said nothing :/
You have to set up rcon password in server's config first:
seta rconpassword "" // Rcon admin password - CHANGE THIS
  1. Type actual password
  2. Save config
  3. Restart server
 
Last edited:
Posts
6
Likes
0
lol, no, 'cause MaceMadunusus gets really, REALLY triggered when somebody mentions "RPing" and "remove time limit" :D.
A lot of related drama:
Full Open game mode
RP servers
Hosting Server - Time limit removal
[SOLVED] - Time
Thank you !
I checked my files .siege and all was timed 300.
So.. i thik it"s a bug. But anyway.
It's a shame that there is an option in the config for the time but which is useless...
Last question: Why when i load in open mode a map, 1/3 time there is no pictures for the classes on the teams ?
 
Posts
6
Likes
0
lol, no, 'cause MaceMadunusus gets really, REALLY triggered when somebody mentions "RPing" and "remove time limit" :D.
A lot of related drama:
Full Open game mode
RP servers
Hosting Server - Time limit removal
[SOLVED] - Time

You have to set up rcon password in server's config first:

  1. Type actual password
  2. Save config
  3. Restart server
I know for the passwords, but you know.. I did it but in the config that i gave, i deleted the password in case of :)
Still don't work.
 

Puppytine

Slayed dreamer
Posts
2,237
Likes
1,493
I know for the passwords, but you know.. I did it but in the config that i gave, i deleted the password in case of :)
Still don't work.
Are you sure it didn't work?
What happens if join your server, then open a console by pressing Shift + ~ (aka Shift + `), then type
Code:
rconpassword PassFromCfg123
and then type
Code:
rcon map mb2_smuggler
?
 
Posts
6
Likes
0
Are you sure it didn't work?
What happens if join your server, then open a console by pressing Shift + ~ (aka Shift + `), then type
Code:
rconpassword PassFromCfg123
and then type
Code:
rcon map mb2_smuggler
?
Smod works perfectly but when i type rconpaswword etc.. it said nothing. NOTHING AT ALL x)
 

Puppytine

Slayed dreamer
Posts
2,237
Likes
1,493
Smod works perfectly but when i type rconpaswword etc.. it said nothing. NOTHING AT ALL x)
its not supposed to say anything. it still works if you use it.
Basically what Vis said
So just start MBII and type BOTH those two lines.
You'll get some output *only* after second command ("rcon map...").
It will be either map change or "bad password" message.
 
Top